keep blowing a fuse

[tkejoe450]

ok..I keep blowing the fuse for my gauge and turn signals.....I keep replacing it, but it keeps on blowing. Does anyone know what this could be caused by? If so, I would greatly appreciate your advice..thanks.

[kawboy]

Check your turn signals and wires. If one of the wires is loose and grounds out it will pop a fuse. The same goes for your gauge wires.

[Mabbottusmc]

Sounds like it's wired wrong or has a short. Get a multimeter and test it out.

[brownbrown4]

they are 100% right. its a short somewhere. you have aftermarket signals?

[tkejoe450]

thanks for the advice I appreciate it...I'll check that out.

[ThreeSixT]

Yo, this is similair to the problem that I had with my RR. Eventually, I found that the plastic for one of the signal wires had melted and the wire itself was hitting the exhaust, thus causing a short. Good luck finding the short....believe me, it's fun. :rolleyes: