PDA

View Full Version : pics of vivian... now

RayDOActive
08-23-2005, 08:46 PM
http://img.photobucket.com/albums/v176/pEsCaDoR/motorcycles/63601.jpg
RayDOActive
08-23-2005, 08:47 PM
this is the side that was replaced. i have to repaint the red stripe and get more decals made to match the other side. also got some chips in the lips of the rims that i have to retouch.
http://img.photobucket.com/albums/v176/pEsCaDoR/motorcycles/63602.jpg
RayDOActive
08-23-2005, 08:48 PM
thinking about just getting a carbon fiber cover to fit over the stator cover to cover up the scratches. anything else i can do to cover this up other than buy a new one?
http://img.photobucket.com/albums/v176/pEsCaDoR/motorcycles/63603.jpg
RayDOActive
08-23-2005, 08:49 PM
shifter side attack rearsets.
http://img.photobucket.com/albums/v176/pEsCaDoR/motorcycles/63604.jpg
RayDOActive
08-23-2005, 08:51 PM
brake side rearsets w/ braided lines. FYI: i dont know if this is the case with all aftermarket rearsets, but the stock lines would not mesh with the new rearsets so i HAD to get new lines.
http://img.photobucket.com/albums/v176/pEsCaDoR/motorcycles/63605.jpg
RayDOActive
08-23-2005, 08:52 PM
and last, a couple of shots of the new pipes. thanks to pikababy, i got a few bucks knocked off of what i had to pay for these.
http://img.photobucket.com/albums/v176/pEsCaDoR/motorcycles/63606.jpg
RayDOActive
08-23-2005, 08:53 PM
oh yah and im STILL waiting for my new plates. hahaha.
http://img.photobucket.com/albums/v176/pEsCaDoR/motorcycles/63608.jpg
RedGsxr
08-23-2005, 08:59 PM
Looks good. Finally the work is done! well almost...
Robert
08-23-2005, 09:02 PM
Sweet glad to see you back on the road...
phooNAMI
08-23-2005, 09:23 PM
Nice...what kind of pipes are they? Looks of an MV too... :thumbsup:
RayDOActive
08-23-2005, 09:28 PM
laser extreme exhaust. had it imported from the netherlands or something like that. always liked the MV, so when i saw these i was sold. you should see the one for the R1. four mufflers.
Irk
08-23-2005, 09:37 PM
Nice man :thumbsup:!
daMartian
08-23-2005, 10:07 PM
nice arvin... good job...

side note - are you able to paint my extra rims????
RayDOActive
08-23-2005, 10:07 PM
yah i can do em for you marv.
Akino
08-23-2005, 11:42 PM
nice arvin!! for the stator cover, i say just sand it down, then paint the sucker.. if not, that carbon fiber cover is fine.

glad to have u bak homie... ride safe out thurr!! :thumbsup:
justjay619
08-24-2005, 01:07 AM
thinking about just getting a carbon fiber cover to fit over the stator cover to cover up the scratches. anything else i can do to cover this up other than buy a new one?
http://img.photobucket.com/albums/v176/pEsCaDoR/motorcycles/63603.jpg

if you go to
www.kawiforums.com
they're having a group buy for the carbon fiber cover. it's $100 shipped. it should still be going on. i'm gonna order mine within a week or 2.
oh yea, the bike looks clean. i like the red stripe and matching rims. nice touch. :thumbsup:
plus the exhaust, that's something i've never seen on a 636 before.
DucMonzter750
08-25-2005, 12:25 PM
Yo Arvin.... She looks good! I saw Dan test ride her after she was all put back together and all....

The shop still has that R1 with the laser pipes.... That thing is SICK!!!!

Ride Safe bro.....
daMartian
08-25-2005, 12:40 PM
yah i can do em for you marv.

cool... let me know when youre available
Lost
08-25-2005, 12:49 PM
if you go to
www.kawiforums.com (http://www.kawiforums.com/)
they're having a group buy for the carbon fiber cover. it's $100 shipped. it should still be going on. i'm gonna order mine within a week or 2.
oh yea, the bike looks clean. i like the red stripe and matching rims. nice touch. :thumbsup:
plus the exhaust, that's something i've never seen on a 636 before.
I would go billet! For 150-180 you should be able to score a race quality cover that will survive several crashes. I got one after my turn three issue (read "crash"), a few months back. I swear its like an inch thicker and its all billet goodness. The one i got was a white buffalo, but there are a bunch of nice ones out there!
MrCrashRR
08-25-2005, 12:52 PM
I would go billet! For 150-180 you should be able to score a race quality cover that will survive several crashes. I got one after my turn three issue (read "crash"), a few months back. I swear its like an inch thicker and its all billet goodness. The one i got was a white buffalo, but there are a bunch of nice ones out there!

seriously the only way to go
rossifumi
08-25-2005, 01:48 PM
yeah, woodcraft or ATTACK! would be nice replacements. Nice laser arvin, where in the world did you hear about that pipe? :whistle:
DiegoBrigao
08-25-2005, 03:51 PM
yeah, woodcraft or ATTACK! would be nice replacements. Nice laser arvin, where in the world did you hear about that pipe? :whistle:

That's a good one! :thumbsup:
caligrownR619
08-25-2005, 04:17 PM
Good to see that your bike is up and runnin! Are you taking her out tonite for our usual thursday hangout in Eastlake? The rearsets are nice too compared to the one you had before... :cheers:
RayDOActive
08-25-2005, 06:45 PM
joe:
i dont know if i can make it out tonight. i have these pretty good gouges in my rear tire from who knows where and i cant find a place that will put my new tires on with such short notice.

diego and john:
yah. i gotta give you guys the credit for showing me those pipes. i seriously feel BAD about not getting them through you guys, but the deal i got... i just couldnt pass up.