FS: Championship Racebike (2005 CBR600rr)

[SteelRain]

I hate to let her go; but she does not get ridden anymore (other than a trackbay a month) and I know somebody could have alot fun or win races with this bike.

Details

I have owned this bike since it was in the crate
2005 Honda CBR 600rr approximately 6000 miles
127.6hp at the wheel during last checkup/maintenance (Novmeber 2009)
Multiple Championships won on this equipment
Bike is located in San Diego, CA

On the Bike
Penske Forks (by CTR suspension) setup for 200lbs rider
Penske "Tripple Clicker" Shock (by CTR suspension) setup for 200lbs rider
Galfer Wave Rotors
Galfer Lines
Vortex Clipons
Vortex Rearsets
Vortex Gascap
Vortex Fairing Stays
CRG Roll-a-Click Levers
Mycron 3 Onboard Computer (replaces guage cluster adds built in Laptimer) as seen in MotoGP, WSBK, and AMA
GPR Damper
Yoyodyne Throttle Kit (adjustable from one-quarter to one-sixth turn)
Yoyodyne Starter
Dynojet Power Commander III USB
Dynojet Ignition Module
Dynojet Quick Shiter Kit
NRC engine cases
Leo Vince SBK full system exhaust


Included in Sale
Spare unused swingarm assembly with bearings
Chickenhawk Tire Warmers
Race Transponder
Lap Timer Beacon
Lap timer Reciever
Spare OEM Rotors
Spare Ignition switch
Spare OEM shock resprung by CTR Suspension for 210lbs rider
Spare Cush Drive
Spare VOrtex Clipons
OEM Clipons
Additional Throttle Plates
Additional Galfer Brake Pads
Additional NEW sprockets 44 and 45 Tooth (46 tooth on the bike)
Oil Filters
Spare Brakelines
OEM Brakelines
Spare Rearset Components
Spare Levers


Unfortunately my sponsors have required the bodywork, but I do have a set old bodywork (it needs some paint)

$5000

I can be reached at 858.207.7372 During the day I most likely will be unable to answer, so please leave a message.

Thanks for Looking, David.

[Arnold_R1]

"I hate to see her go... but I like to watch her leave..."

Can you post up some pics of the bike. That would definitely help!

[OrignalGaangsta]

dyno sheets available?
no HRC stuff and 127 at the wheel? What motor work is done?
which championships?

[Ananda]

yeah pix of the bike would help

[SteelRain]

Originally Posted by Ananda

yeah pix of the bike would help

Working on that. My house is a mess right now. The move the construction, ugh...

I have Dyno Sheets, etc The motor is ALL HRC in the inside.

[deathblow]

Originally Posted by SteelRain

Working on that. My house is a mess right now. The move the construction, ugh...

I have Dyno Sheets, etc The motor is ALL HRC in the inside.

Unless you have special hookups, HRC kit parts available to us normal folk include wiring harness, radiator, computer, springs and such. It would be immensely helpful if you elaborated on 'ALL HRC in the inside' as 127HP at the wheel is quite substantial.

And I would also like to know what Championships the bike has won? MotoGP, WSBK, WSS, AMA, WERA, CCS, AFM, CMRA, WSMC, etc...?

[SteelRain]

Originally Posted by deathblow

Unless you have special hookups, HRC kit parts available to us normal folk include wiring harness, radiator, computer, springs and such. It would be immensely helpful if you elaborated on 'ALL HRC in the inside' as 127HP at the wheel is quite substantial.

And I would also like to know what Championships the bike has won? MotoGP, WSBK, WSS, AMA, WERA, CCS, AFM, CMRA, WSMC, etc...?

Championships where in WERA and CCS
I worked for HRC at one point. I have hookups.
BTW bike is sold. I may be selling its sister... If I get a S1000RR for 2012.

[Satchel]